How Often Should You Check Your Smoke Detectors?
Fire Alarm Testing
Whether your fire alarm is protecting your home or a commercial facility, regular testing of your fire alarm system is critical to ensure it is working correctly. This test guarantees that everyone occupying the home or office understands what to do when the fire alarm sounds, gives you a chance to check the batteries and equipment, and confirms you are meeting local safety standards.
Residential Fire Alarm Testing
The National Fire Protection Association (NFPA) recommends that homeowners test their smoke alarms at least once a month using the test button. This is the case for both battery-powered and hard-wired smoke alarms.
It’s essential to follow the manufacturer’s instructions for keeping smoke alarms clean and maintained so they work correctly. Sensors that collect dust or become water damaged will be less effective and can be a danger to your home.
Smoke alarm batteries should be replaced every year unless the battery chirps – then the battery should be replaced right away. Smoke alarms should be replaced entirely every ten years.
In addition to checking your equipment and batteries, you should do yearly assessments of your family’s emergency readiness. Fire safety for kids is important because it will help your children respond in a careful, practiced manner and allow everyone to get out without harm. Home fire safety practice can be as simple as having discussions at the dinner table about what to do in the case of a fire or teaching your kids how to get help if they should ever need it.
Commercial Fire Alarm Testing
Fire alarm testing requirements for business owners will be determined by the Authority Having Jurisdiction (AHJ) in the area where your business is located. The AHJ is the organization, office, or individual responsible for enforcing fire codes in your area.
The AHJ may be the county, it may be the city, and it may be an engineer. There can be many differences between AHJs in how they enforce codes and what codes are applied, so testing requirements for your fire alarm system must be set and verified by them.
Most jurisdictions set their testing requirements following the codes and standards set by the NFPA – NFPA 72: National Fire Alarm and Signaling Code®.
You will most likely be required to test your fire alarm system yearly. However, you may be required to check more frequently depending on the type of business you run and where it is located.
You also will likely be required to have visual inspections done for all your fire alarm components. Again, these inspections may be necessary only annually, or however often your AHJ has determined appropriate.
Fire Drills in the Workplace
It is important to train your employees in your building on proper fire alarm response and the steps to take in case of a workplace emergency. Creating an Emergency Action Plan and keeping all of your employees trained will allow everyone to feel confident and exit the building safely, should a fire begin.
Emergency Action Plans are an OSHA requirement for workplaces with more than ten employees.
Involving your staff in annual fire inspections is also a great time to refresh everyone on emergency procedures and evacuation steps.
Who can Test a Fire Alarm?
Fire alarm testers must be certified by the National Institute for Certification in Engineering Technologies (NICET) or licensed by the state.
At FSS Technologies, our fire alarm system designers and installers are NICET certified. We understand the nuances of installing, testing, and inspecting fire alarms in our local jurisdictions. Contact us for a free consultation.
Explore Our Other Blogs
Why Security Camera Installation Should Be Left to the Professionals
Why You Should Hire a Professional Security Camera Installer If you are not an audiovisual professional, installing quality, capable home security equipment can be a much bigger ordeal than you anticipated. The DIY home security systems advertised on television look easy to set up and install. The truth is that we’ve received many calls from…
5 Reasons Why You Need a Home Security System
A home security system protects your home and the ones you love. While there are many reasons you may need to invest in a home security system, we have highlighted some key ones: 1. Peace of Mind Have you heard a noise in the night and ever wondered what made the noise? A home security…
Which Businesses are Burglarized Most?
The idea of business theft and burglary is not a pleasant one; however, the likelihood of your business being burglarized is rather high. In fact, approximately 37% of small business owners were impacted by burglary or theft over the past year. Retail businesses in particular are highly targeted as thieves are seeking the opportunity to either use or resell stolen items. Everything from simple shoplifting to employee theft can contribute to overall business…
Can Motion Sensors be Triggered by Light?
Motion sensors are a common part of our world today. Wave your hand under the faucet and the water runs. Pull open the closet door and the light turns on. Walk near the doors of the grocery store and they automatically slide open. Motion sensors are devices that detect movement. They are common features in…
How Do Wireless Doorbells Work?
A doorbell is a pretty self-explanatory tool—you press the button outside, and a chime goes off inside, alerting the homeowner that someone is at the front door. Like everything else, though, today’s technology has brought even the humble doorbell into the limelight as an indispensable tool for convenience and security. Pros and Cons of Wireless…
How to Make Your Business’s Fire and Security Systems ADA Compliant
The Americans with Disabilities Act (ADA) was created to stop discrimination against and to ensure the rights of people with disabilities. It serves as an equal opportunity law for people with disabilities, defined as “physical or mental impairment that substantively limits one or more major life activities.” For businesses, the ADA means that the services…
What is Video Alarm Verification?
Video alarm verification is a tried-and-true technology that is an underused component in residential and commercial security systems. Video alarm verification adds an extra element to your overall security by partnering your security system with an alarm monitoring center. When an alarm is triggered, video alarm verification allows monitoring center employees to view the situation…
Avigilon Alta: The Industry’s Leader in Commercial Access Control
With the rise in popularity of hybrid workspaces and flexible scheduling, more business owners are turning to access control systems to secure their investments. Not only are access control systems the latest standard for commercial security, but FSS Technologies is a proud partner with Avigilon Alta, the leading access control system manufacturer. Why Avigilon Alta?…
Do Smoke Detectors Call the Fire Department?
One of the most asked questions about fire alarm systems is whether smoke detectors call the fire department. The belief that a smoke detector or fire alarm will automatically activate the fire department or send a signal to local first responders is a common misunderstanding. While some systems may be integrated with monitoring services, that’s not always…
How Do Fire Alarm Control Panels Work
A fire alarm control panel is the brain of any commercial fire system. It constantly monitors connected devices, processes signals, and activates alarms when necessary. Understanding how a control panel works can help business owners, facility managers, and safety professionals recognize just how vital this piece of equipment is in protecting people and property. What…